Put it on my son's apollo rfz x18 125cc dirt bike. Bike started on the first kick and ran great! Idled perfectly without even adjusting anything!

Very easy install. I had to move my needle adjustment up to notches to get mixture set. Totally changed my SSR 125. I noticed a significant increase in power and sound. I am purchasing another one for our other 125.

After installing I was getting a bog when cracking throttle quickly. On my 20 ssr 125 the location of the air/fuel mixture screw was almost impossible to get to(front bottom of carb). I ended up flipping the intake around and adding fuel line so that I could tune it. This put the carb by the front wheel and allowed me to get to the brass screw. I was not getting any improvement. I new I was not getting enough fuel. Everything was good and clean so I ordered several pilot jets with none being correct style. I ended up drilling out pilot jet to .5mm and moving the needle to its highest position(clip all the way down) and got good results after tuning air/fuel mixture. Put intake and carb back to normal position and this thing has way more power and runs much better. I also went from nkg 8 to nkg7 spark plug to help make up for the increase in fuel and that also added more throttle response.

This product was great, if you are installing this on a Apollo pit bike you have to use the stock L shaped pipe as the new one won't fit.

It too just a little bit of carb tuning but either then that it runs perfect once you tune it to your liking

Its great. Have ordered 2 others because they work well

This Carb Is Amazing. Directly Fit on my 2016 SSR 125, Stock Was 22mm and I decided to go with this 26mm Carb and I’m glad I did! Throttle more responsive, And Very Easy to install I highly recommend this product

Very happy with product, worked great with no issues.Price was very reasonable and came with everything shown in pic

fix my taotao db17 sounds better

Works as described

Easy install, tuning, smooth idle.

I have the 19 and swap to this 26 and I feel a lot of difference, more torque and fast acceleration , runs smoothly. The only thing was the throttle cable but a easy fix

Okay so for all of those putting this on a 125cc as the gentleman before me said you have to move the needle that attaches to the throttle cable. one of the previous reviews while very helpful can be easily misunderstood so let me clarify. The review of the gentleman who says pit the c clip on the TOP slot on the needle if your looking at the needle as it sits inside of the sleeve you actually need to put it on the BOTTOM clip position raising the needle to ITS TOP position. Once i figured this out my bike RIPS!!! No jetting necessary for some fun ripping around. Im at sea level just for reference so dont assume you dont need jets if you live at elevation.

Great replacement for Mikuni VM22 26MM carb if you don’t want to spend the coin on a real Mikuni. Works well on Thumpstar 140.

Night and day difference from Factory carb. One downfall new out of the box the ground off the name brand of the carburetor. I will give them five stars just in the performance from stock

Works great. APOLLO 125 RFZOPENED THE BIKE UP BIG TIME.

Great mikuni knock off. Buy a jet kit and you're good to go.

More pep to the Apollo 125 pretty big difference

All my gas is on the floor not good this is not the real thing ran good for a week now just pushed gas everywhere

I put it on my Apollo x18 it definitely added more power but it’s still boggs a little. Any tips on what I should do?