Reviews - www.ztwo.com

Customer Reviews (1027)

US$ 2.24
~
US$ 2.80

2020-01-10

Reviews (227)

El****th

For Outback Subaru 06
US$ 11.12
~
US$ 13.90

2020-01-09

Reviews (10)

R****y

Product was in great condition and was exactly the part I needed. Works great and arrived fast!
US$ 13.20
~
US$ 16.50

2020-01-08

Reviews (10)

k****.

Bought these to replace broken front brake and clutch levers. Easy install and fits 2000 yzf r6 perfectly
US$ 2.24
~
US$ 2.80

2020-01-08

Reviews (227)

S.****ce

Good value for the money, works as advertised, worth the cost , cut job difficulty in half!
US$ 2.80
~
US$ 3.50

2020-01-08

Reviews (16)

jd****ra

So far this chain guide is doing a great job..👍👍👍
US$ 2.80
~
US$ 3.50

2020-01-07

Reviews (16)

Ma****on

Since it ’s been there, there ’s a lot less dirt on the wheels and the motorcycle looks cool.
US$ 2.24
~
US$ 2.80

2020-01-06

Reviews (227)

Jo****er

Very pleasantly surprised, I thought for the price the tool would have been poor assembly, but it was thick steel, sturdy pins and welds. The only down fall is the assembly rivet used as the pivot needs to wear in a bit. It's just a tad tight right now.
US$ 2.24
~
US$ 2.80

2020-01-05

Reviews (227)

N****C

This is a must have tool for an auto or truck technician. Works great for water pumps, holding misc pulleys, holding clutch baskets on atvs and the list goes on. Very happy with this tool.
US$ 13.20
~
US$ 16.50

2020-01-04

Reviews (84)

S****e

Bought this hoping to just replace the control switch and Use the rest for spares. Nope. Wires don’t line up. Didn’t want to figure it out so I just replaced all the wiring and It works. Except the stator. The stator is different and didn’t fit. Oh well.
US$ 2.24
~
US$ 2.80

2020-01-04

Reviews (227)

St****ki

Did what it is intended for
US$ 2.24
~
US$ 2.80

2020-01-04

Reviews (227)

D****a

Very Useful!
US$ 4.40
~
US$ 5.50

2020-01-03

Reviews (23)

R****.

This carbutetor works perfect on my 2020 taotao tbr7. I rejetted the main with a 117.5 and mix screw out 2 turns. I did not have to adjust the pumper part, it works perfect. Took me 35 minutes to install and set up. Bike runs 10 times better with no lean spots. As far as the float goes, all small engine carbs just use a pin to hold the float, its all friction. To use this carb you must have a mechanical understanding. It's not plug and play, too many variables. I will buy again if I need another carb.
US$ 2.24
~
US$ 2.80

2020-01-03

Reviews (227)

J****l

Not sure how I got my clutch but so tight, because I always used to just use a strap wrench, but now I have thing, taking the clutch out is a breeze!!! Super handy tool!!!
US$ 1.76
~
US$ 2.20

2020-01-02

Reviews (158)

J****s

I like that they show a good color on the spokes and I didn’t like how you put them on too much.
US$ 4.72
~
US$ 5.90

2020-01-02

Reviews (6)

Am****er

Fit greats. Redesigned to be stronger .
US$ 2.24
~
US$ 2.80

2020-01-02

Reviews (227)

Co****im

Good tool, I use it to set up Ford 9 carrier bearing preload and backlash.
US$ 11.12
~
US$ 13.90

2019-12-31

Reviews (10)

Da****ys

Worked just like it should
US$ 7.12
~
US$ 8.90

2019-12-30

Reviews (46)

Am****er

Works great
US$ 2.24
~
US$ 2.80

2019-12-30

Reviews (227)

Ca****27

Used on a fan clutch and look forward to other uses. With 2 different size pins, will be used on many projects.
US$ 4.40
~
US$ 5.50

2019-12-29

Reviews (23)

da****ce

Worked very well on our Coolster 125 and has the ability to remove parts and service the carb as needed. Good quality at a fair price.

31 32 33 34 35 ... 51 52

All Categories

Chain Drive System

Motorcycle Repair Tools

Go Kart Parts

Oil Filter & Tank Switch

Dirt Bike Parts

Self Balancing Scooter

Monkey Parts

2 Stroke Bicycle Parts

Polaris Parts

ATV Parts

Wheels System Parts

Frame & Drive System

Engines & Engine Parts

Electrical Parts

Carb & Air Filters

Brake & Clutch System

Handlebar Systeam

GY6 Mopeds Team

Pocket Parts

Company Info

Customer Reviews (1027)